In compliance with standards and regulations (e.g. DIN 75220, IEC 68, US-SFTP, MIL-STD 810).

Adaption of the light spectrum to the desired application realized by different radiation sources and filter systems.

Realizing of irradiation volumes (Uniformity in x – y – z enlargement).

Design for specific ambient conditions (e.g. temperature, climate, wind, acoustics).

Adaption of the luminaries to different mounting conditions.

Special lamp design (e.g. lamps with cooling system).

Conversion of lighting functionalities: tunnel simulation, cloud simulation, day cycle simulation.

Lamp frame equipment with special mechanical functionalities: height movement, X-Y movements, angle irradiation (front, rear, lateral).

Sun simulation control via manual control unit, touch screen or PC.

Operating software with standard and special functions (reproduction of irradiation scenarios, irradiation cycles, contour adaption, zone regulation).

Integration of measurement technique (pyranometer, black-body temperature sensors) with closed loop regulation of irradiation power and temperature.

For tests according to IEC 61215 / IEC 61646 und EN 12975.

Simulator class from C/C/C to B/B/A (according to IEC 60904-9).

Irradiation power of 600 – 1200 W/m², irradiation power of 200 W/m² with additional dimming grids.

Individual design of the sun simulator to the required size of the irradiation area.

Mobile frames or frames for fixed installation are available for lamp mounting.

Fixtures for solar modules can be integrated in the lamp frames.

Sun simulator control via manual control unit, touch screen or PC.

Optionally equipped with shutter system, to allow access during lamp operation.

UV-lamps for UV preconditioning with an irradiation power of 250 W/m² in the UV range.

Accessories: automatic measurement system (x-y movement) for irradiation area measurement, e.g. with reference cell.

Special equipment for solar collector tests: lamp frames with angle adjustment and height movement, lamp bank with integrated "cold sky", special radiation sources according to the collimation criteria.

Design for specific ambient conditions (e.g. temperature, climate, wind, acoustics).

Dimming range: 100 – 10 % irradiation power.

Adaption of the lamp banks to different mounting conditions.

Lamp frame equipment with special mechanical functionalities: height movement, X-Y movements, angle irradiation (front, rear, lateral).

System control via manual control unit, touch screen or PC.

Operating software with standard and special functions (reproduction of irradiation scenarios, irradiation cycles, contour adaption, zone regulation).

Integration of measurement technique (pyranometer, black-body temperature sensors) with closed loop regulation of irradiation power and temperature.